AS2632
AS2632
AS2632
AS2632
AS2632
AS2632
Featuring a smooth deck extension, universal drive controller and simple serviceability, the electric AS2632E and hydraulic AS2632 provide exceptional safety and reliability for indoor scissor lift needs.

Specifications

Drive Speed :
Lowered: 2.2 ± 0.12 mph (3.5 ± 0.19 km/h) Elevated: 0.5 ± 0.06 mph (0.8 ± 0.1 km/h)
Gradeability :
25%
Inside Turning Radius :
11" (28 cm)
Lift Time :
31 ± 3 seconds
Lower Time :
40 ± 3 seconds
Machine Weight :
4,718 lbs (2,140 kg)
Maximum Ground Pressure :
122.2 psi
Maximum Slope :
1.5° / 3°
On-Deck Extension Capacity :
265 lbs (120 kg)
Outside Turning Radius :
7' (213 cm)
Overall Height :
6.4' (195 cm) - rails down 7.6' (232 cm) - rails up
Overall Length :
7.9' (241 cm)
Overall Width :
2.7' (82 cm)
Platform Capacity :
510 lbs (231 kg)
Platform Extension :
3' (91 cm)
Platform Occupants :
2 - indoor use only
Standards Compliance :
ANSI A92.20 CSA-B354.6
Work Height :
32.8' (1,000 cm)

Battery & Service

  • Advanced battery charger with voltage protection
  • Slide-out component tray offers easy access to Trojan deep-cycle batteries and hydraulic pump
  • Battery charging status indicator
  • Charging operation limit

Hydraulic

  • Optimized electronic control system
  • Battery powered with zero emissions
  • Optimization of hydraulic system delivers longer lasting performance

Diagnostics & Sensors

  • Intelligent diagnostic system
  • Tilt sensor and tilt alarm
  • Slope sensor
  • Motion alarm
  • Flashing beacon/buzzer (both sides)
  • Emergency descent
  • Descent alarm and protection
  • Overload alarm
  • Hour meter
  • Horn

Reinforced Working Platform

  • AC power to platform; 120VAC (GFCI) platform power
  • 3-foot platform extension with smooth foot pedal control
  • Fold-in guard rails
  • Self-closing, self-catching entry gate
  • Lanyard anchor point

Universal Controller

  • Universal drive control box with motion alarm and LED screen
  • Proportional control
  • Quick disconnect for control box
  • Emergency stop device

Warranty

  • 1 year: Full machine and attachment
  • 2 years or 2,000 hours: Electric & hydraulic drive motors, lift cylinders, hydraulic valves, hydraulic pumps
  • 5 years: Frame weldment, scissor stacks, platform weldment

Scissor Stacks

  • Large scissor arms for increased stability and durability
  • Pressure transducer (overload protector)
  • Full-height drive

Drive & Tires

  • 4x2 drive
  • Extra wide, non-marking tires
  • Improved steering mechanism reduces tire wear when turning
  • Pothole guards
  • Two-wheel brake
  • Manual brake release
  • Better brakeability on long downhills
  • Specifications

    Specifications

    Drive Speed :
    Lowered: 2.2 ± 0.12 mph (3.5 ± 0.19 km/h) Elevated: 0.5 ± 0.06 mph (0.8 ± 0.1 km/h)
    Gradeability :
    25%
    Inside Turning Radius :
    11" (28 cm)
    Lift Time :
    31 ± 3 seconds
    Lower Time :
    40 ± 3 seconds
    Machine Weight :
    4,718 lbs (2,140 kg)
    Maximum Ground Pressure :
    122.2 psi
    Maximum Slope :
    1.5° / 3°
    On-Deck Extension Capacity :
    265 lbs (120 kg)
    Outside Turning Radius :
    7' (213 cm)
    Overall Height :
    6.4' (195 cm) - rails down 7.6' (232 cm) - rails up
    Overall Length :
    7.9' (241 cm)
    Overall Width :
    2.7' (82 cm)
    Platform Capacity :
    510 lbs (231 kg)
    Platform Extension :
    3' (91 cm)
    Platform Occupants :
    2 - indoor use only
    Standards Compliance :
    ANSI A92.20 CSA-B354.6
    Work Height :
    32.8' (1,000 cm)
  • Details

    Battery & Service

    • Advanced battery charger with voltage protection
    • Slide-out component tray offers easy access to Trojan deep-cycle batteries and hydraulic pump
    • Battery charging status indicator
    • Charging operation limit

    Hydraulic

    • Optimized electronic control system
    • Battery powered with zero emissions
    • Optimization of hydraulic system delivers longer lasting performance

    Diagnostics & Sensors

    • Intelligent diagnostic system
    • Tilt sensor and tilt alarm
    • Slope sensor
    • Motion alarm
    • Flashing beacon/buzzer (both sides)
    • Emergency descent
    • Descent alarm and protection
    • Overload alarm
    • Hour meter
    • Horn

    Reinforced Working Platform

    • AC power to platform; 120VAC (GFCI) platform power
    • 3-foot platform extension with smooth foot pedal control
    • Fold-in guard rails
    • Self-closing, self-catching entry gate
    • Lanyard anchor point

    Universal Controller

    • Universal drive control box with motion alarm and LED screen
    • Proportional control
    • Quick disconnect for control box
    • Emergency stop device

    Warranty

    • 1 year: Full machine and attachment
    • 2 years or 2,000 hours: Electric & hydraulic drive motors, lift cylinders, hydraulic valves, hydraulic pumps
    • 5 years: Frame weldment, scissor stacks, platform weldment

    Scissor Stacks

    • Large scissor arms for increased stability and durability
    • Pressure transducer (overload protector)
    • Full-height drive

    Drive & Tires

    • 4x2 drive
    • Extra wide, non-marking tires
    • Improved steering mechanism reduces tire wear when turning
    • Pothole guards
    • Two-wheel brake
    • Manual brake release
    • Better brakeability on long downhills

Other Boom Lifts Models

Contact

Contact

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages.

Consignment

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages.

Request a Service

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages.

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages.

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location

×

Leppo Rents Employee Portal